TOPICS OF DIPLOMA WORKS

Themes of bachelors 2019:

1. Acid-base surface properties of catalysts based on oxides of Ti (IV) and Mn (IV)    
2. Nitrogen-containing carbon sorbents
3. Atmospheric tube unit of atmospheric vacuum tube installation.
4. Removal of soluble organic substances from aqueous solutions by carbon sorbents
5. Additives to diesel fuel based on petroleum acids
6. Conductometric study of the kinetics of polymerization of epoxy resins
7. Technology of slow coking of oil residues
8. Contamination of aviation fuels and lubricants with water and mechanical impurities
9. Polymer gasoline production technology 
10. Prolonged sorbents based on mineral and biopolymer materials
11. Technology of production of high-octane additives to gasoline
12. RT jet fuel production technology
13. Electrolysis of a mixture of carboxyl and carbonyl compounds
14. Restoration of quality indicators of compressor oils
15. Methods of control of gasoline and diesel fuels for long-term storage   
16. Waste gas processing technology for cracking hydrocarbons
17. Influence of dust and chemical pollution on air of industrial environments
18. Mineral-biopolymer composites as non-ferrous metal sorbents
19. Physico-chemical properties of waste oils after their extraction purification
20. Explosives production technology
21. Improving the quality of alternative fuels  
22. Oils for modern aircraft
23. Stabilization of gasoline.
24. Secondary processing of products of the atmospheric-vacuum tube
25. Vacuum tube unit of atmospheric vacuum tube installation
26. Research of qualitative characteristics of paints and varnishes 
27. Thermooxidative decomposition of silicon-containing polyurethanes
28. Polyethylene terephthalate production technology
29. Latex polyisoprene compositions for coatings
30. Creation of biodegradable polymer compositions based on modified polyethylene
31. Polyisoprene-polyacrylamide varnish coatings
32. Technology of production of nylon-6,6 from adipic acid and hexamethylenediamine
33. Phenol-formaldehyde resin production technology
34. Physico-chemical properties of polymer nanocomposites based on polyamides and carbon nanotubes
35. Modification of rubbers based on polychloroprene   
36. Comparative characteristics of the adhesive properties of alkyd and epoxy paints   
37. Caprolactam nylon production technology
38. Biodegradable composite materials based on synthetic polymers and starch
39. Methods of modification of fluoropolymers as a way to obtain new high-tech products
40. Obtaining polyvinyl butyral structured with carbon nanotubes  
41. Modification of operational properties of polymethyl methacrylate for aircraft construction  
42. Influence of flame retardants on fire resistance of polymer compositions
43. Improvement of the automatic system of leveling the level and control of oil depot tanks
44. Influence of magnetic treatment of hydrocarbon fuels on their operational properties
45. Study of the effect of energy additives on the flammability of jet fuels
46. Assessment of environmental consequences of operation of main oil and gas pipelines
47. Influence of magnetic field on ecological properties of hydrocarbon fuels
48. Assessment of toxicity of alternative fuels
49. Operational features of the use of alternative fuels in vehicles
50. Research of compatibility of jet fuels with construction materials

Themes of bachelors 2018

1. Influence of carbon spherical nanoclusters on saturated vapor pressure of motor fuel components
2. Influence of total concentration of binary mixtures of inhibitors on the position of synergistic extremes and anticorrosive efficiency
3. Hydrocracking in the production of light petroleum products 
4. Surfactant systems as a way to minimize evaporation of hydrophilic compounds
5. Solid chemical rocket fuels
6. Dielectric properties of alcohol-heptane mixtures
7. Alternative diesel fuels based on vegetable oils
8. Modern methods of modification of motor fuels
9. Stratification of oil and fuel emulsions of the 1st kind
10. Technology of catalytic hydrotreating of straight-run gasoline fractions
11. Conductometric determination of the composition of alcohol-heptane solutions
12. Influence of nanosized spherical carbon clusters on the surface tension of aqueous-alcoholic media
13. Cleaning of used motor oils
14. Obtaining and properties of nitrogen-containing activated carbon
15. Influence of methods of preparation of steel surfaces on adhesive properties of paint and varnish coverings of different types
16. Supramolecular complexes polyvinyl alcohol – boric acid
17. Thermal properties of polymer-polymer composites based on polypropylene
18. Structurally modified elastic polyurethanes based on hydrocarbons and oils of natural origin 
19. Synthesis and study of the properties of reticulated polycyanurates
20. Production of epoxy thermosetting resins – components of composite materials in aircraft construction
21. Technological process of production of glyphtal resins
22. Structural properties and biodegradation of compositions based on polyethylene and natural additives
23. Biodegradable composites based on polyethylene and starch
24. Influence of flame retardants of different nature on fire resistance of polymeric materials
25. Synthesis and research of rubber-epoxy compositions
26. Technology of catalytic synthesis of vinylidene chloride from chlorovinyl production waste
27. Obtaining, physicochemical properties and use of polycarbonates
28. Methods of utilization of polymeric materials
29. Purification of glycerol with carbon adsorbents and their

regeneration

           30. Investigation of polyurethanes modified with complex metal compounds

Topics for bachelors 2019 OPP “Chemical technologies of alternative energy resources”:

1. Environmentally friendly aviation fuels based on vegetable oils
2. Evaluation of operational properties of biodiesel
3. Application of hydrogenation processes for the production of motor biofuels 
4. Evaluation of photovoltaic solar systems as a source of alternative energy 
5. Evaluation of the effectiveness of the introduction of technologies for the production of biodiesel
6. Improving the microbiological stability of jet fuels
7. Biogas plant for energy supply of the farm
8. Analysis of the potential of hydrogen as an alternative motor fuel
9. Modification of hydrocarbon fuels with additives to improve operational and environmental properties 
10. Evaluation of the use of vegetable oils as alternative lubricants and working fluids
11. Analysis of prospects for the introduction of wind energy in Ukraine
12.  Evaluation of phase stability of alcohol-gasoline fuels
13. Causal analysis of the relationship between physical stability and evaporation of traditional and alternative aviation fuels
14. Evaluation of the physical stability of ethanol-containing gasoline
15. Estimation of efficiency of use of seaweed raw materials for production of biofuels
16. Evaluation of the use of environmentally friendly components to improve the anti-wear properties of aviation fuels
17. Estimation of efficiency of wind energy use in Ukraine
18. Estimation of the use of non-traditional hydrocarbon sources in Ukraine
19.  

Themes of masters 2018

1. Selection of inhibitors to prevent the formation of tar-asphaltene deposits in petroleum mixtures
2. Study of changes in the properties of mineral motor oils during operation
3. The effect of additives on the properties of bitumen
4. Comprehensive study of higher paraffins and their mixtures
5. Oxidized carbon sorbents to soften water
6. Magnetically sensitive carbon sorbents are made from natural raw materials
7. Determination of technological parameters of sorption of carbon monoxide (IV) from biogas
8. Determination of quality indicators of used motor oil
9. Sedimentation of coal in aqueous-alcoholic solutions stabilized by surfactants
10. Research of the main operational indicators of quality of gasoline A-98 with oxygenate additives 
11. Electrochemical regeneration of carboxylic acids in extracts of waste oils
12. Analysis of associated and natural gas fields of Chernihiv region
13. Influence of temperature on surface activity of synergistic surfactant mixtures
14. Research of bioethanol – as an effective component of motor gasoline 
15. Electrical properties of alcohol suspensions of coal containing surfactants
16. Carbon layered nanoclusters as additives to motor fuels
17. The use of optimal surfactant systems based on oleodin, phosphatidine in the storage of liquid hydrocarbons 
18. Comprehensive utilization of used aviation lubricants
19. Modern methods of measuring the characteristics of hydrocarbon fuels
20. Drainage and degassing of waste oils
21. Production and storage of A-95 gasoline in industrial conditions
22. The use of surfactants to stabilize aqueous emulsions of oxygenate gasolines
23. Properties and use of ultra-high molecular weight polyethylene of high density
24. Technological aspects of obtaining polymer composites with bactericidal properties
25. Application of polymer compositions for multilayer materials
26. Cationic polymerization of isoprene in the presence of catalytic systems
27. Study of modification of surface properties of polypropylene fibers by copper nanoparticles 
28. Investigation of the influence of polymer impurities structured by nanotubes on the properties of concrete mixtures
29. Modification of rubber based on a combination of chloroprene rubber with general purpose rubbers
30. Technological aspects of obtaining sealing materials 
31. Comparison of the protective properties of epoxy, acrylic and alkyd coatings applied to metal surfaces after their electrospark. Finishing

Themes of masters 2019

1. Analysis of natural and associated gases of Boryslavnaftogaz oil and gas production department.
2. Creation of energy resources on the basis of peat
3. Regeneration and rational use of waste oils
4. Improving the performance of lithium oils by adding effective additives
5. The effect of modification of the thickener with titanium dioxide on the properties of aerosil-containing lubricants
6. Chemical stability of jet fuels
7. Modern aspects of restoring the quality of used motor oils
8. Environmental aspects of waste lubricants
9. Technological processes of production of diesel fuel of the Euro-5 standard
10. Determination of energy characteristics of natural gas 
11. Development of fertilizer composition using peat
12. Obtaining biodiesel by ethanol transesterification of rapeseed oil
13. Analysis of marketable and used motor oils
14. Anticorrosive efficiency of individual inhibitors and their synergistic mixtures of nitrite-silicate in the corrosion of steel in aqueous saline solutions
15. Adsorption method of reducing the sulfur content in diesel fuel
16. Obtaining biodiesel by butanol transesterification of rapeseed oil
17. Copolymers of polyvinyl alcohol for water purification
18. Biodegradation of composite materials based on low density polyethylene and plant fillers.  
19. Ultrasonic treatment of polyethylene compositions containing biodegradable fillers  
20. Modified carbon sorbents are made of bio- and artificial polymers
21. Butadiene rubbers with improved performance